SANDING

EFFICIENT WOOD SANDING - PART 1 - WIDE BELT OPERATIONS - Produced in cooperation with Norton Company. This program is designed to take the mystery out of sanding. Troubleshooting, critical elements of machine set-up, and tips for quality improvement and cost reduction are reviewed by Norton's William T. (Bill) Beaty. Machines reviewed include abrasive planers, intermediate wide belt sanders and cross belt-wide belt sanding systems.
(77 min.) For Video In English Order R13E. $115.00, For Video In Spanish Order
R13S. $115.00

EFFICIENT WOOD SANDING - PART 2 - SANDING DEPARTMENT OPERATIONS - Continuation of Video R13 with the review of troubleshooting and cost saving tips for the following operations: mould sanding, spool sanding, brush-backed sanding, flutter sanding, stroke sanding, edge sanding and pump drum sanding. Operations were video taped at Bassett Furniture Industries and Thomasville Furniture Industries.
(58 min) For Video In English Order R14E. $115.00, For Video In Spanish Order
R14S. $115.00

VIDEO MAGAZINE SERIES 2, ISSUE 8 - THE TECHNOLOGY UPDATE SERIES FOR THE WOOD PRODUCTS INDUSTRY
Innovations in sander ventilation
New ventilation system for multiple opening presses
Hazard communication program
(33 Min.) English Only. Order Video W8. $79.95

VIDEO MAGAZINE SERIES 3, ISSUE 9. - WOOD INDUSTRY VIDEO JOURNAL
FEATURE
Excerpt on mould sanding from the Norton Company film "Mechanized Wood Sanding"
Block making
Breaking-in sanding belts
Mould sander
Auto feeding round table tops
Spool sanding, disc sanding
Sanding carvings, Flutter sanding, brush sanding
INTERESTING IDEAS
Fence system for ripping long stock
Cleaning of abrasive belts on wIde belt sanders by using "dummy" panels
Storage of abrasive belts
Jaw bolt wood connector
FEATURE
Excerpt from a supervisory development seminar conducted by Mr. Roy Hatten for Henredon Furniture Industries, Inc.
English Only. Order Video J9. $79.95

VIDEO MAGAZINE SERIES 3, ISSUE 10. - WOOD INDUSTRY VIDEO JOURNAL
FEATURE
Dr. R. Bruce Hoadley of the University of Massachusetts discusses wood and its structure
Productivity losses which occur because of handling time and ways to reduce these losses
INTERESTING IDEAS
Use of rubber to clean sanding belts
Retrofit backknife lathes to save wood materials
and chuck tenon through the "nubbin"
Rough mill supervisor changes cut-off saw setup to save wood
Use of heat exchangers to conserve energy in dry kilns
FEATURE
Excerpt from Roy Hatten's seminar on supervisory development for Henredon Furniture Industries, Inc.
Excerpts from Woodworking Machine Operators Training Programs
English Only. Order Video J10. $79.95

VIDEO MAGAZINE SERIES 3, ISSUE 11. - WOOD INDUSTRY VIDEO JOURNAL
FEATURE
Handling losses by a tennis racket manufacturer
Productivity losses which are due to delays or production imbalances
Excerpts from Roy Hatten's seminar on surervisory development
INTERESTING IDEAS
Inspection of a lumber stacker
A sander for "ball" turnings
Modified straight line ripsaw used as a busting saw
Yield incentive plan for supervisors
FEATURES
Dr. R. Bruce Hoadley discusses Wood Technology
Shrinkage and swelling of wood
Warpage
Excerpt from "on the job" training program
English Only. Order Video J11. $79.95

VIDEO MAGAZINE SERIES 3, ISSUE 14. - WOOD INDUSTRY VIDEO JOURNAL
FEATURE
Use of hydraulic cutterheads
Interview with Al Brown of Forest City Tool Co.
Visit to Hickory Manufacturing Co.
INTERESTING IDEAS
Optical comparison device at Hickory Manufacturing Co.
Air knives for belt sanders
Gas fired heating system at Kittinger Co.
Scissors lifts at Kittinger Co.
FEATURE
Geiger copy shaper
English Only. Order Video J14. $79.95

VIDEO MAGAZINE SERIES 3, ISSUE 15. - WOOD INDUSTRY VIDEO JOURNAL
FEATURE
Department of Wood and Paper Science, North Carolina State University
Dr. Richard Thomas explains the Department's program
Veneer checking project
Moisture pallets for lumber drying
Use of a compressometer at the glue reel for checking gluing pressures
A shaper for abrasive wheels
Machining studies
Laminated veneer project
Troubleshooting gluing problems
Lathe automation project
English Only. Order Video J15. $79.95

EFFICIENCY IN WOODWORKING - Lecture 7. PURCHASING (60 MIN.) Order Video E7. $69.95
- How to save other materials by smart purchasing

[ Home | Subject Search | Full Listing | Order Form ]